GBC AdvancedPunch Pro - GP 6.1.9 die TYPE Procedure

GBC AdvancedPunch Pro 09/11/2018 General Procedures and Information
6-21
GP 6.1.9 DIE TYPE Procedure
The Die Type feature identifies the type of Die Set installed to the
AdvancedPunch Pro.
1. From the top level screen,
READY
SINGLE PUNCH
2. Press either the up arrow button or the down arrow button to display
the SETTINGS/ INFORMATION screen.
SETTINGS
INFORMATION
3. Press the down arrow button to move the return symbol down until it
is next to the word INFORMATION,
SETTINGS
INFORMATION
4. Press the ENTER button to display the DIE TYPE – DIE CYCLES
screen.
DIE TYPE
DIE CYCLES
5. Press the ENTER button when the return symbol down is next to the
words DIE TYPE.
This displays the DIE TYPE screen,
DIE TYPE
WIRE 3:1 SQUARE
6. Press the ENTER button to return to the DIE TYPE – DIE CYCLES
screen.
DIE TYPE
DIE CYCLES
7. Press the up arrow button to display the EXIT option.
EXIT
PREVIOUS MENU
8. Press the ENTER button to return to the top level screen
READY
SINGLE PUNCH