General Procedures and Information 09/11/2018 GBC AdvancedPunch Pro
6-82
Glossary of Terms
These terms are common to the punch and bindery industry.
A predetermined distance of the top punched hole
from the side edge of the sheet (viewed from the
punch output orientation.
A predetermine distance from the trail edge of the
sheet of paper to the punched hole(s).
For double-punch, a predetermined distance from the
center of the sheet of paper to the mid-punched hole
(s)
The term used to describe the process of aligning the
sheet of paper until it is parallel to the paper path.
The term used to describe the fact that the sheet of
paper is not parallel to the paper path.
To Next Page
Loading...
