GBC AdvancedPunch Pro - GP 6.1.8 PAPER SIZE Procedure

General Procedures and Information 09/11/2018 GBC AdvancedPunch Pro
6-20
GP 6.1.8 PAPER SIZE Procedure
Do the following to select ANSI or ISO paper sizes.
1. From the top level screen, press either the up arrow button or the
down arrow button.
READY
SINGLE PUNCH
This displays the SETTINGS - INFORMATION screen
SETTINGS
INFORMATION
2. Press the ENTER button when the return symbol is next to the word
SETTINGS. Press the down arrow button so the return symbol is next
to the word Paper Size.
UNITS
PAPER SIZE
3. Press the ENTER button when the return symbol is next to the word
Paper Size to display the Paper Size screen.
PAPER SIZE
*
ANSI
4. Press the down arrow to scroll through the speed options
 ANSI
 ISO
PAPER SIZE
ISO
 If you are running LTR/11x17/STMT sizes – set the “Paper Size”
setting to ANSI.
 If you are running one of the ISO sizes (A3, A4, A5) set the
“Paper Size” setting to ISO.
5. When the return symbol is next to the desired paper size, press the
ENTER button to set the paper size and return to the PAPER SIZE /
PREVIOUS MENU screen.
PAPER SIZE
*
PREVIOUS MENU
6. Press the up arrow twice to display the EXIT / SPEED (DFA) screen.
EXIT
*
PREVIOUS MENU
7. Press the ENTER button to return to the top level screen
READY
SINGLE PUNCH