GBC AdvancedPunch Pro - Operator Messages; Top Row of Text; Bottom Row of Text

GBC AdvancedPunch Pro 11/07/2018 RAPS
2-5
OPERATOR MESSAGES
The Operator Panel displays status messages and fault codes on two rows of text.
READY
SINGLE PUNCH
Top Row of Text
Message
Description
Action
CLOSE DOOR The Front Door is open. Close the Front Door.
READY The system is ready. Use the Punch to punch paper or bypass the Punch.
Bottom Row of Text
Message
Description
Action
CHECK DIE Check the Die Set Check the Die Set
BYPASS The Punch is in Bypass Mode Use the Punch in Bypass Mode.
SINGLE PUNCH The Punch is in Single Punch Mode Use the Punch in Single Punch Mode.
DOUBLE PUNCH (Available
for DFA configuration only)
The Punch is in Double Punch Mode Use the Punch in Double Punch Mode.