GBC AdvancedPunch Pro - GP 6.1.7 UNITS MODE Procedure

GBC AdvancedPunch Pro 09/11/2018 General Procedures and Information
6-19
GP 6.1.7 UNITS MODE Procedure
Do the following to select the Units mode- MM or INCHES.
1. From the top level screen, press either the up arrow button or the
down arrow button.
READY
SINGLE PUNCH
This displays the SETTINGS - INFORMATION screen
SETTINGS
INFORMATION
2. Press the ENTER button when the return symbol is next to the word
SETTINGS. Press the down arrow button so the return symbol is next
to the word Units.
LANGUAGE
UNITS
3. Press the ENTER button when the return symbol is next to the word
Units to display the UNITS screen.
UNITS
MILIMETERS
4. Press either the up arrow button or the down arrow button to change
units displayed.
UNITS
INCHES
 Millimeters
 Inches
5. Press the ENTER button to input the value, and display the Units /
Previous Menu screen.
UNITS
PREVIOUS MENU
6. Press the down arrow button once to move the return symbol next to
the word PREVIOUS MENU.
UNITS
PREVIOUS MENU
7. Press the ENTER button to display the SETTINGS - INFORMATION
screen.
SETTINGS
INFORMATION
8. Press the up arrow button to display the EXIT option.
EXIT
PREVIOUS MENU
9. Press the ENTER button to return to the top level screen
READY
SINGLE PUNCH