GBC AdvancedPunch Pro - GP 6.1.11 PUNCH CYCLES Procedure

GBC AdvancedPunch Pro 09/11/2018 General Procedures and Information
6-23
GP 6.1.11 PUNCH CYCLES Procedure
The Punch Cycles feature lists the total number of punch sheets
AdvancedPunch Pro has processed.
1. From the top level screen,
READY
SINGLE PUNCH
2. Press either the up arrow button or the down arrow button to display
the SETTINGS/ INFORMATION screen.
SETTINGS
INFORMATION
3. Press the down arrow button to move the return symbol down until it
is next to the word Information,
SETTINGS
INFORMATION
4. Press the ENTER button to display the DIE TYPE – DIE CYCLES
screen.
DIE TYPE
DIE CYCLES
5. Press the down arrow button until the return symbol is next to the
words the PUNCH CYCLES.
DIE CYCLES
PUNCH CYCLES
6. Press the ENTER button when the return symbol is next to the words
PUNCH CYCLES. to display the PUNCH CYCLES screen.
PUNCH CYCLES
23,495
7. Press the ENTER button to display the DIE CYCLES – PUNCH
CYCLES screen.
DIE CYCLES
PUNCH CYCLES
8. Press the up arrow button four times to display the EXIT option.
EXIT
PREVIOUS MENU
9. Press the ENTER button to return to the top level screen
READY
SINGLE PUNCH