GBC AdvancedPunch Pro Service Manual

General Procedures and Information 09/11/2018 GBC AdvancedPunch Pro
6-4
Settings
Backgage
The Backgage feature allows you to scroll up or down to change the
backgage setting.
Alignment
The Alignment feature allows you to scroll up or down to change the
alignment setting.
You can change the alignment of the paper passing through the punch
inboard and outboard +2.0 mm.
Tab/Cover
The Tab /Cover feature enables the system to .
Clear Cover
The Clear Offset feature allows you to set the Backgage and Alignment
for only Clear Cover media. This setting does not affect other plain media.
Language
The Language feature allows you to select the language for the user
interface. The language options are: English, Francais, Espanol, Deutsch,
and Italiano.
Units
The Units feature allows you to select the units displayed on the user
interface. Select MM for millimeters of IN for inches.
Paper Size
This is used the set the machine for running US (ANSI) paper sizes or
ISO paper sizes.
Information
The User Interface allows you to view information about. Die Type, Die
Cycles, Punch Cycles, and Firmware
Die Type
The Die Type feature identifies the type of Die Set installed to the
AdvancedPunch Pro.
Die Cycles
The Die Cycles feature lists the number of cycles on the Die Set installed
to the AdvancedPunch Pro.
Punch Cycles
The Punch Cycles feature lists the number of punch cycles completed by
the Punch.
Firmware
The Firmware feature identifies the level of the firmware installed to the
AdvancedPunch Pro.

GBC AdvancedPunch Pro Specifications

General

Brand	GBC
Model	AdvancedPunch Pro
Category	Printer Accessories
Language	English