GBC AdvancedPunch Pro - GP 6.2 Service User Interface Procedure

To Next Page

To Previous Page

GBC AdvancedPunch Pro 09/11/2018 General Procedures and Information

6-29

GP 6.2 Service User Interface Procedure

To enter the Service User Interface:

1. Press and hold both the Up Arrow button and the Down Arrow button

for 5 seconds.

Then while still holding down the Up Arrow button and the Down

Arrow button, press the Enter button.

The Service User Interface screen will appear.

Use the procedures in the following pages to use Service User Interface

Other manuals for GBC AdvancedPunch Pro