General Procedures and Information 09/11/2018 GBC AdvancedPunch Pro
6-60
GP 6.10 Base Cleaning
Chips and paper dust falls to the bottom of the punch. Clean every
service call.
1. Clean with a vacuum cleaner each time the machine is serviced.
2. The customer can also do this between the technician’s visits.
GP 6.11 Chip Bin Cleaning
Do the following on every service call to clean the Chip Tray.
1. Remove the Chip Bin and empty it.
2. Vacuum out paper chips and dust from the Chip Bin tray, especially at
the holes on the sides of the Chip Tray.
To Next Page
Loading...
