GBC AdvancedPunch Pro 11/07/2018 RAPS
2-7
8. Replace the Dieset Recognition Cable #023N01331 (PL 7.3).
This clears the fault code.
Y N
Go to step 9.
Normal operation.
9. Do REP 5.3 to replace the Dieset Recognition Reader Board
Assembly (PL 5.1).
This clears the fault code.
Y N
Go to step 10.
Normal operation.
10. Do REP 5.1 Main Control Board Replacement to replace the Main
Control Board (PL 7.1).
This clears the fault code.
Y N
Escalate to second level.
Normal operation.