Keysight x-series - Page 55

Table Of Contents
4.3.7.4 Display Theme 1867
4.3.7.5 Backlight 1868
4.3.7.6 Backlight Intensity 1869
4.3.7.7 Hints 1869
4.3.7.8 Numeric Entry Auto Open 1869
4.3.7.9 Touch On/Off 1870
4.3.7.10 Control Size 1870
4.3.7.11 Quick Save Mode 1870
4.3.7.12 Screen Tabs Left/Right 1871
4.3.7.13 Hide Screen Tabs in Full Screen 1872
4.3.7.14 2-Screen Orientation 1873
4.3.7.15 Clock Format 1874
4.3.7.16 Language 1875
4.3.7.17 Restore User Interface Defaults 1875
4.3.7.18 User Interface Type (Remote Query Only) 1876
4.4 Power On 1877
4.4.1 Power On State 1877
4.4.2 Power On Application 1879
4.4.3 FPGA Configuration 1879
4.4.3.1 FPGA Load Preference 1882
4.4.3.2 Load FPGA 1883
4.4.4 Restore Power On Defaults 1884
4.4.5 Configure Applications – Desktop application 1884
4.4.6 Configure Applications - Instrument boot-up 1887
4.4.7 Configure Applications - Remote Commands 1887
4.4.7.1 Configuration list (Remote Command Only) 1888
4.4.7.2 Configuration Memory Available (Remote Query Only) 1888
4.4.7.3 Configuration Memory Total (Remote Query Only) 1888
4.4.7.4 Configuration Memory Used (Remote Query Only) 1889
4.4.7.5 Configuration Application Memory (Remote Query Only) 1889
4.5 Restore Defaults 1890
4.5.1 Input/Output 1890
4.5.2 I/O Config 1891
Vector Modulation Analyzer Mode User's &Programmer's Reference 55