Keysight x-series - Page 63

Table Of Contents
Repetitions 2097
Marker 1 – Marker 4 2097
Sync Seq File 2097
Insert Waveform 2098
Segments in ARB Memory 2098
Delete Segment From ARB Mem 2099
Delete All From ARB Memory 2099
Delete Segment 2099
Save Sequence 2099
Build New Sequence (Remote Command Only) 2099
Edit Selected Sequence 2102
Segment 2102
Waveform 2102
Repetitions 2102
Marker 1 – Marker 4 2102
Sync Seq File 2103
Insert Waveform 2103
Segments in ARB Memory 2104
Delete Segment From ARB Mem 2104
Delete All From ARB Memory 2104
Delete Segment 2104
Waveform Utilities 2104
Add Waveform 2104
Replace Selected Waveform 2105
Clear Waveform from Slot 2106
Lock Waveform in Slot 2106
Slot Status Query (Remote Command Only) 2107
Slots Free Query (Remote Query Only) 2107
Slots Used Query (Remote Query Only) 2107
Slot Waveform Name Query (Remote Command Only) 2108
Slot Waveform Unique ID Query (Remote Command Only) 2108
Locked Waveform Name List Query (Remote Query Only) 2109
Locked Waveform Unique ID List Query (Remote Query Only) 2109
Multi-Pack License multi-module control state (Remote Command Only) 2109
Header Utilities 2110
Clear Header 2110
Save Header 2110
Query Waveform Unique ID (Remote Query Only) 2110
Query Selected Waveform Header info (Remote Query Only) 2111
6.1.12 Trigger Initiate 2112
6.1.13 Source Sync 2112
6.1.13.1 Sync Config 2112
6.1.13.2 Sync Type 2113
6.1.13.3 Sync Settings 2114
Secondary Module List 2114
Sync Settings 2115
Sync Segment 2 2116
Vector Modulation Analyzer Mode User's &Programmer's Reference 63