Keysight x-series - Page 67

Table Of Contents
6.5.6 Edit Correction Settings 2216
6.5.6.1 Select Correction 2216
6.5.6.2 Freq Interpolation 2216
6.5.6.3 Transducer Unit 2218
6.5.6.4 Description 2219
6.5.6.5 Comment 2219
6.5.7 Complex Corrections 2220
6.5.7.1 Go To Row (Select Correction) 2221
6.5.7.2 Delete Row 2221
6.5.7.3 Delete All 2221
6.5.7.4 Correction On 2222
6.5.7.5 Correction Port 2222
6.5.7.6 Direction 2223
6.5.7.7 Description 2224
6.5.7.8 Comment 2224
6.5.7.9 File 2225
6.5.7.10 Freq Interpolation (Remote Command Only) 2225
6.5.7.11 Set Data (Remote Command Only) 2226
6.5.8 Apply Corrections 2226
6.5.9 Delete All Corrections 2227
6.5.10 Correction Group On/Off 2228
6.5.11 Break 2228
6.5.12 Reload Corrections From Files 2231
6.5.13 Edit Correction Group 2231
6.5.13.1 Go to Row 2231
6.5.13.2 Insert Row Below 2231
6.5.13.3 Delete Row 2232
6.5.13.4 Select File 2232
6.5.13.5 Specify File 2232
6.5.13.6 Remove File 2232
6.5.13.7 Correction Trace Display 2232
6.5.13.8 Description 2233
6.5.13.9 Comment 2233
Vector Modulation Analyzer Mode User's &Programmer's Reference 67