Table Of Contents
6.5.13.10 Start Frequency 2233
6.5.13.11 Stop Frequency 2234
6.5.14 Merge Correction Data (Remote Command Only) 2234
6.5.15 Set (Replace) Data (Remote Command Only) 2235
6.5.16 Correction Group Range Data (Remote Command Only) 2235
6.5.17 Delete Correction Group Range (Remote Command Only) 2236
6.6 Freq Ref Input 2237
6.6.1 Freq Ref Input 2237
6.6.2 Ext Ref Freq 2242
6.6.3 Default External Ref Freq 2243
6.6.4 LO Ref Input 2243
6.6.5 Ref Lock BW 2244
6.6.6 Reference Oscillator On/Off (Remote Command Only) 2245
6.6.6.1 Select Ref 2245
6.6.6.2 Freq Ref In 2246
6.6.6.3 External Freq Ref 2246
6.6.6.4 Ext Ref Locked (Remote Query Only) 2246
6.7 Output 2248
6.7.1 Analog Out 2248
6.7.2 Screen Video Level 2252
6.7.3 Digital Bus Out 2253
6.7.4 Wideband Digital Bus 2253
6.7.5 Data Stream 2256
6.7.6 I/Q Cal Out 2256
6.7.7 Aux IF Out 2257
6.7.8 Arbitrary IF Freq 2259
6.7.9 Ext/Wide IF Out 2259
6.7.10 IF2 Out 2260
6.7.11 REF Out 2261
6.7.12 LO Ref Out 2261
6.8 Trigger Output 2263
6.8.1 Trig 1 – 4 Out 2263
6.8.2 Trig 1 – 4 Out Polarity 2265
68 Vector Modulation Analyzer Mode User's &Programmer's Reference
To Next Page
Loading...
