Table Of Contents
6.8.3 Trig 1 – 4 Out Device 2266
6.8.4 Src PXI Trig Out 2266
6.8.5 Src Trig Out Polarity 2267
6.8.6 Select Src PXI Line 2267
6.8.7 Analyzer PXI Trig Out 2268
6.8.8 Analyzer Trig Out Polarity 2269
6.8.9 Select Analyzer PXI Line 2269
6.8.10 Source Internal Trig Out 2269
6.8.11 Source Internal Trig Out Polarity 2270
6.9 Calibration 2272
6.9.1 Configuration 2272
6.9.1.1 Cal Group 2274
6.9.1.2 Calibrate Checked Rows 2274
6.9.1.3 Apply Cal Group 2275
6.9.1.4 Abort Calibration 2275
6.9.1.5 Copy From Cal Group 2276
6.9.1.6 Copy 2276
6.9.1.7 Cal Input 2277
6.9.1.8 Freq Offset 2277
6.9.1.9 Select Calibrator 2278
6.9.1.10 Identify RCal Module 2278
6.9.1.11 RCal Module Serial Number (Remote Query Only) 2278
6.9.1.12 RCal Reference 2278
6.9.1.13 RCal Status 2279
RCal Status (Remote Query Only) 2280
All RCal Status (Remote Query Only) 2280
6.9.1.14 Go to Row 2280
6.9.1.15 Insert Row Below 2281
6.9.1.16 Description 2281
6.9.1.17 Use Current Meas 2281
6.9.1.18 Duplicate Row 2282
6.9.1.19 Delete Row 2282
6.9.1.20 Delete All 2282
6.9.1.21 Calibrate 2282
Vector Modulation Analyzer Mode User's &Programmer's Reference 69
To Next Page
Loading...
