Keysight x-series - Page 77

Table Of Contents
8.1.1.19 Prot Channel Detection 2458
8.1.1.20 Prot Frame Aligned 2458
8.1.1.21 Prot Event 2459
8.1.2 Trigger Level 2459
8.1.3 Trigger Delay 2461
8.1.4 Trigger Slope 2465
8.1.5 Trigger Level Absolute/Relative 2466
8.1.6 Absolute Trigger Level 2467
8.1.7 Relative Trigger Level 2467
8.1.8 Period 2469
8.1.9 Offset 2470
8.1.10 Reset Offset Display 2471
8.1.11 Offset Adjust (Remote Command Only) 2471
8.1.12 Sync Source 2472
8.1.13 TV Line 2472
8.1.14 Field 2473
8.1.15 Standard 2474
8.1.16 Trigger Center Frequency 2475
8.1.17 Trigger BW 2475
8.1.18 Zero Span Delay Compensation On/Off 2476
8.1.19 Select PXI Line 2476
8.1.20 Reset Sync Monitor 2477
8.1.21 Trigger Optimization 2478
8.1.22 Trigger Settings Diagram 2479
8.2 Gate Source 2480
8.2.1 Select Gate Source 2480
8.2.2 Sync Holdoff 2481
8.3 Gate Settings 2483
8.3.1 Gate On/Off 2483
8.3.2 Gate View On/Off 2484
8.3.3 Gate Delay 2486
8.3.4 Gate Length 2487
8.3.5 Gate Method 2488
Vector Modulation Analyzer Mode User's &Programmer's Reference 77