Keysight x-series - Page 78

Table Of Contents
8.3.6 Control Edge/Level 2489
8.3.7 Gate Holdoff 2490
8.3.8 Gate View Sweep Time 2491
8.3.9 Gate View Start Time 2492
8.3.10 Gate Delay Compensation 2493
8.3.11 Min Fast Position Query (Remote Query Only) 2494
8.3.12 Gate Preset (Remote Command Only) 2495
8.3.13 Gate Level (Remote Command Only) 2495
8.3.14 Gate Polarity (Remote Command Only) 2495
8.4 Enables the hardware accelerated stepped FFT gating feature
(Display only) 2497
8.5 Periodic Sync Src 2498
8.5.1 Select Periodic Timer Sync Source 2498
8.6 Auto/Holdoff 2499
8.6.1 Trig Holdoff 2499
8.6.2 Auto Trig 2499
8.6.3 Holdoff Type 2500
9 Programming the Instrument 2502
9.1 List of Supported SCPI Commands 2503
* 2503
A 2503
C 2503
D 2511
F 2514
H 2514
I 2514
L 2516
M 2516
O 2517
R 2518
S 2518
T 2540
U 2541
78 Vector Modulation Analyzer Mode User's &Programmer's Reference