2 - 34 Memory Blocks
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
Notes
1. Features such as Code Restriction do not operate properly unless a PBX/CTX Access Code is specified. This
limitation applies to PBX lines assigned in Memory Block 3-91 (Trunk Type Selection).
2. A pause is not inserted in the number of an outgoing call on a CO line.
3. Up to three numeric characters and three pauses can be specified.
4. A pause cannot be inserted as the first digit or as consecutive digits.
5. The entry for pause is –.
Example:
Elite IPK
System
Elite IPK System
Intercom Line
PBX Line
PBX
CO Line
To Next Page
Loading...
