NEC Electra Elite IPK - Dial 9 (Trunk Access Code) 214-222-5000

Electra Elite IPK Document Revision 4
Programming Manual 3 - 45
___________________________________________________________________________________
___________________________________________________________________________________
3. Dial A .
Dial tone stops.
The Terminal LCD shows 1.
4. Dial
BABGEB .
CAP LEDs 00 and 01 light green.
The Terminal LCD shows 1212752.
5. Dial
EKKK .
LEDs remain On.
Ring Back Tone is generated.
The Terminal LCD shows 12127527000.
SETUP is sent to the Network.
SETUP Message
6. PRT is connected.
LEDs remain On.
Conversation starts.
7. The Terminal LCD displays the elapsed time for the call.
3.7.2 Dial 9 (Trunk access code) 214-222-5000
LCR search sequence: Area Code:214 → Route Adv 02 → Route 02
→ RAB 02→ TG 02 → CO 23.
Operation:
1. Go off-hook, and listen for ICM dial tone.
The Terminal LCD shows 100
→.
2. Dial the Trunk Access Code (
I ).
The KSU generates an LCR Dial Tone.
The Terminal LCD shows LCR.
3. Dial
BAD .
Dial tone stops.
CPN NSF
RAB TN NPI TNI NIP NID
F/S
FCV
Service FCV Feature FCV
Service
Parameter
01 2(N) 1 212-752-5000 None None None S MEGACOM None