NEC Electra Elite IPK - System Call Park Recall Time Selection

2 - 124 Memory Blocks
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
1-2-23 System Call Park Recall Time
Selection
General Description
Use this Memory Block to specify the time before a CO/PBX call recalls back to a
station from Call Park.
This Memory Block can be adjusted in 1-second intervals (R3000 or higher).
Display
Settings
Refer to next page for R3000 or higher Programming Procedures.
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8 The shaded
selection is the
default. Times
are in minutes.
0.5 1.0 1.5 2.0 3.0 5.0 8.0 10.0
Programming Procedures
1 Go off-line.
2 Press LK1 + LK2 +
BC to access the Memory Block.
3 Press the corresponding CO/PBX line key to change the data option.
4 Press
G to write the data and display the next Memory Block.
5 Program the next Memory Block or press
E to go back on-line.
System Mode
1
Submode
2
Data No.
23
PC Programming
¦ +BM
2 3 : P A R K R E C L 1 . 0
T I M E D I S P L A Y
Setting
Data
Title
Data
No.