NEC Electra Elite IPK - Automated Attendant Answer Delay Time Assignment

Electra Elite IPK Document Revision 4
Programming Manual 2 - 165
___________________________________________________________________________________
___________________________________________________________________________________
1-4-13 Automated Attendant Answer Delay
Time Assignment
General Description
Use this Memory Block to specify the time, in seconds, before the Automated
Attendant answers an incoming CO/PBX call.
Display
Related Programming
Refer to individual features in the Electra Elite IPK Features and Specifications Manual.
Programming Procedures
1 Go off-line.
2 Press LK1 + LK4 +
JJAC to access the Memory Block.
3 Use the dial pad to enter the delay time for AA MSG. 1.
KK ~ II to enter number of seconds
Default Values
All Automated Attendant Messages:
4 sec.
4 Press G to write the data, and advance to the next AA MSG.
5 Repeat Steps 3 and 4 for all messages. The next Memory Block is displayed.
6 Program the next Memory Block or press
E to go back on-line.
System Mode
1
Submode
4
Data No.
13
PC Programming
¦ +AU
1 3 : A A D L Y 1 = 0 4 s
T I M E D I S P L A Y
Data
No.
AA MSG.
(1~8)
Title
Setting
Data