NEC Electra Elite IPK - Figure 3-3 Physical Layout and Default VLAN Ids

3 - 58 Advanced Applications
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
H Ports 1, 5, and 7
IP telephone programming tags voice traffic on VLAN 100, and the PC on
port 1 is attached to an IP telephone with a PC port set for VLAN 200.
H Port 2
Not Used.
H Port 3
PC requires default VLAN ID setting of 200, because it may not be able to
tag traffic.
H Ports 4 and 6
VoIP cards without native ability to tag traffic.
H Port 8
Ethernet switch with native VLAN tagging abilities enabled.
Figure 3-3 Physical Layout and Default VLAN IDs
MB 1-16-05 Default VLAN
ID Tag Insertion Assignment
Port 8 0001
(any)
Port 7 0001
(any)
Port 6 0100
Port 5 0001
(any)
Port 4 0100
Port 3 0200
Port 2 0001
Port 1 0001
(any)