2 - 200 Memory Blocks
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
1-7-06 External Paging Timeout Selection
General Description
Use this Memory Block to specify the time allowed for External Paging before timeout
and release of the paging circuit. R1000/R2500/R3500 Speaker 59 uses this timer.
This Memory Block can be adjusted in 1 second intervals (R3000 or higher).
Display
Settings
Refer to next page for R3000 or higher Programming Procedures.
LK 1LK 2LK 3LK 4LK 5LK 6 LK 7 LK 8 The shaded
selection is the
default. Times
are in minutes.
0.5 1.0 1.5 2.0 3.0 5.0 8.0
∞
(No Limit)
Programming Procedures
1 Go off-line.
2 Press LK1 +
LK7+
KF
to access the Memory Block.
3 Press the corresponding CO/PBX line key to change the data option.
4 Press
G to write the data. The next Memory Block is displayed.
5 Program the next Memory Block or press
E to go back on-line.
System Mode
1
Submode
7
Data No.
06
PC Programming
¦
+BP
0 6 : E S P T I M E R 5 . 0
T I M E D I S P L A Y
Setting
Data
Title
Data
No.
To Next Page
Loading...
