NEC Electra Elite IPK - Call Arrival Key Block Assignment

2 - 112 Memory Blocks
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
1-2-04 Call Arrival Key Block Assignment
General Description
Use this Memory Block to specify the number of Call Arrival keys that can be used in
the system.
Display
Settings
Page 1Ports 01~32
Related Programming
Refer to individual features in the Electra Elite IPK Features and Specifications Manual.
LK 1LK 2LK 3LK 4LK 5LK 6LK 7LK 8
Default: No Call
Arrival Key
Blocks are
assigned.
Port 01~04 Port 05~08 Port 09~12 Port 13~16 Port 17~20 Port 21~24 Port 25~28 Port 29~32
Page 2 Ports 33~64
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8
Port 33~36 Port 37~40 Port 41~44 Port 45~48 Port 49~52 Port 53~56 Port 57~60 Port 61~64
Page 3 Ports 65~96
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8
Port 65~68 Port 69~72 Port 73~76 Port 77~80 Port 81~84 Port 85~88 Port 89~92 Port 93~96
Page 4 Ports 97~CO
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8
Port 97~A0 Port A1~A4 Port A5~A8 Port A9~B2 Port B3~B6 Port B7~C0
Programming Procedures
1 Go off-line.
2 Press LK1 + LK2 +
KD to access the Memory Block.
3 Press the corresponding CO/PBX line key to change the data option.
LK is green = block assigned for CAR
LK is red = block not available for CAR (hardware installed)
Default Values
No Call Arrival Key Blocks are assigned.
Hardware equipped ports are red.
4 Press G to write the data and display the next Memory Block.
5 Program the next Memory Block or press
E to go back on-line.
System Mode
1
Submode
2
Data No.
04
PC Programming
¦ +BK
0 4 : C A R A S S I G N | 0 1
T I M E D I S P L A Y
Setting
Data
Title
Data
No.