Electra Elite IPK Document Revision 4
Programming Manual 2 - 83
___________________________________________________________________________________
___________________________________________________________________________________
1-1-63 Hold Recall Time Selection
(Exclusive)
General Description
Use this Memory Block to specify the time for Exclusive Hold Recall. When No Limit is
selected, Exclusive Hold Recall is not provided.
This Memory Block can be adjusted in 1-second intervals (R3000 or higher).
Display
Settings
Refer to next page for R3000 or higher Programming Procedures.
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8 The shaded
selection is the
default. Times
are in minutes.
0.5 1.0 1.5 2.0 3.0 5.0 8.0
∞
(No Limit)
Programming Procedures
1 Go off-line.
2 Press LK1 + LK1 +
FC
to access the Memory Block.
3 Press the corresponding CO/PBX line key to change the data option.
4 Press
G to write the data and display the next Memory Block.
5 Program the next Memory Block or press
E to go back on-line.
System Mode
1
Submode
1
Data No.
63
PC Programming
¦
+BM
6 3 : H O L D R E C L 1 . 0
T I M E D I S P L A Y
Data
No.
Title
Setting
Data
To Next Page
Loading...
