NEC Electra Elite IPK - Doorphone Chime Assignment (Night Mode)

Electra Elite IPK Document Revision 4
Programming Manual 2 - 507
___________________________________________________________________________________
___________________________________________________________________________________
4-04 Doorphone Chime Assignment
(Night Mode)
General Description
Use this Memory Block to assign up to four doorphones to chime at each station in
Night Mode.
Display
Settings
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8 The shaded
selections
indicate default.
DPH1 DPH2 DPH3 DPH4
Programming Procedures
1 Go off-line.
2 Press +
KD to access the Memory Block.
3 Use LK1~LK4 to assign doorphones 1~4 to chime for Night Mode on Tel Port No.
 Use the following to enter data:
J to move the cursor left
L o move the cursor right
K ~ I to enter numeric data or Tel Port No.
– OR –
D to go to next assigned Tel Port No.
B + A to enter A for Port Numbers 100~109
B + B to enter B for Port Numbers 110~119
B + C to enter C for Port Number 120
Default Values
Ports 01 and 02 chime for all
doorphones.
4 Press G to write the data and display the next Memory Block.
5 Program the next Memory Block or press
E to go back on-line.
Telephone Mode
4
Submode
—
Data No.
04
PC Programming
¦ +BTP
Data
No.
0 1 / 0 4 : D P H N I G H T
T I M E D I S P L A Y
Title
Tel
Port
No.
(01
~ C0)