Electra Elite IPK Document Revision 4
Programming Manual 2 - 19
___________________________________________________________________________________
___________________________________________________________________________________
1-1-12 Station Transfer/Camp-On Recall
Time Selection
General Description
Use this Memory Block to specify the time before a Ring Transfer or Station Camp-On
from a station (without an Attendant Add-On Console) recalls back to the originating
station when the call is not answered.
This Memory Block can be adjusted in 1-second intervals (R3000 or higher).
Display (R2500 or lower)
Settings
Refer to the next page for R3000 or higher Programming Procedures.
LK 1 LK 2LK 3LK 4LK 5LK 6LK 7LK 8
The shaded
selection is the
default.
25s 45s 60s 90s 120s 180s 240s
∞
(No Limit)
Programming Procedures
1 Go off-line.
2 Press LK1 +
LK1 +
AB
to access the Memory Block.
3 Press the corresponding CO/PBX line key to change the data option.
4 Press
G to write the data and display the next Memory Block.
5 Program the next Memory Block or press
E to go back on-line.
System Mode
1
Submode
1
Data No.
12
PC Programming
¦
+BM
1 2 : T R F R E C L 4 5 s
T I M E D I S P L A Y
Title
Data
Setting
Data
No.
To Next Page
Loading...
