2 - 542 Memory Blocks
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
___________________________________________________________________________________
4-35 Voice Mail/SLT Selection
General Description
Use this Memory Block to specify whether or not a Voice Mail system is interfaced with
the system for Single Line Telephone ports.
Display
Settings
.
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8 The shaded
selection is the
default.
NO YS
Programming Procedures
1 Go off-line.
2 Press LK4 +
CE
to access the Memory Block.
3 Press LK2 to interface Voice Mail with single line telephones for Tel Port No.
Use the following to enter data:
J
to move the cursor left
L
to move the cursor right
K
~
I
to enter numeric data or Tel Port No.
– OR –
D to go to next assigned Tel Port No.
B +
A
to enter A for Port Numbers 100~109
B +
B
to enter B for Port Numbers 110~119
B +
C
to enter C for Port Number 120
4 Press
G to write the data and display the next Memory Block.
5 Program the next Memory Block or press
E to go back on-line.
Related Programming
M.B. Number Memory Block Name
7-2
Telephone Type Assignment (used for digital voice mail ports)
Telephone Mode
4
Submode
—
Data No.
35
PC Programmin
To Next Page
Loading...
