NEC Electra Elite IPK - Section 1 Character Assignment

1 - 18 Multiline Terminal Programming
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
08 Specified Station Access Code
Assignment
00 = 01
01 ~ 23 Not Set
Tel. Port Number
9~18 Customized Message 1~10
Assignment
09 = DND
10 = MEETING
11 = BUSINESS
TRIP
12 = NOT IN
13 = WITH GUEST
14 = OUT OF
OFFICE
15~18 = Not
Specified
Maximum of 13 characters.
Refer to Appendix B Character Codes,
Section 1 Character Assignment on
page B-1 for a list of characters.
19 Intercom Ring Pattern Selection B OFF, ON, A~H
20 Intercom Ring Tone Selection A A~H
21 PS Telephone Block Assignment No CAR Blocks are
Assigned
CAR Blocks:
Port 01~C0 - 4 ports per block
22 Call Forward – No Answer Time
Selection
8s (R2500 or lower)
12s (R3000 or
higher)
4s, 8s, 12s, 18s, 24s, 30s, 60s (R2500
or lower)
01s~99s (R3000 or higher)
23 System Call Park Recall Time
Selection
1.0 (R2500 or lower)
060s(R3000 or
higher)
In minutes: 0.5, 1.0, 1.5, 2.0, 3.0, 5.0,
8.0, 10.0 (R2500 or lower)
001s~999s (R3000 or higher)
24 Intercom Feature Access Code
Assignment
Refer to 1-2-24 Intercom Feature Access Code Assignment on
page 2-126.
25 Internal Paging Alert Tone
Selection
YS YS (Tone provided)
NO (No Tone)
26 Delayed Ringing Time Assignment
(ICM)
10s 00~99 sec.
30 PS Out of Area Time Assignment 08s 00~99 sec.
32 IP Telephone Block Assignment Off (No IP Phone
Blocks Assigned)
Off
ON (Green), IP Assigned
On (Red), Block Not available
33 IP Telephone Block Assignment
Allow/Deny Selection
YS (Allow) YS (Allow), NO (Deny)
LK 1 System Mode
LK 2 ICM (Continued)
Data
No.
Memory Block Name Default Value Programming Values