NEC Electra Elite IPK - Receiving Volume Selection

2 - 602 Memory Blocks
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
___________________________________________________________________________________
4-92 Receiving Volume Selection
General Description
Use this Memory Block to specify whether receiving volume is returned to normal
(DOWN) or kept as is (UP) on a call after hanging up.
Display
Settings
 Notes 
LK 1LK 2LK 3LK 4LK 5LK 6LK 7LK 8The shaded
selection is the
default.
DOWN UP
Programming Procedures
1 Go off-line.
2 Press LK4 +
IB to access the Memory Block.
3 Press LK2 to keep volume UP after hanging up a call.
 Use the following to enter data:
J to move the cursor left
L to move the cursor right
K ~ I to enter numeric data or Tel Port No.
– OR –
D to go to next assigned Tel Port No.
B + A to enter A for Port Numbers 100~109
B + B to enter B for Port Numbers 110~119
B + C to enter C for Port Number 120
4 Press
G to write the data and display the next Memory Block.
5 Program the next Memory Block or press
E to go back on-line.
When UP is assigned in this Memory Block, and a user sets the handset volume to maximum, the volume is reset
to a level to meet FCC standard when the user hangs up.
Telephone Mode
4
Submode
—
Data No.
92
PC Programming
¦ +BTT
Data
No.
0 1 / 9 2 : R C V D O W N
T I M E D I S P L A Y
Title
Tel
Port
No.
(01
~ C0)
Setting
Data