NEC Electra Elite IPK - Attendant Transfer Selection During Live Record

Electra Elite IPK Document Revision 4
Programming Manual 2 - 189
___________________________________________________________________________________
___________________________________________________________________________________
1-6-08 Attendant Transfer Selection During
Live Record
General Description
Use this Memory Block to control the Attendant DSS/BLF transfer while the Attendant
is engaged in Live Record. The call is transferred to either the DSS/BLF extension or
the voice mailbox of the DSS/BLF extension. When YS is selected, the call is
transferred to the DSS/BLF extension. When NO is selected, the Live Record session
is addressed to that DSS/BLF extension (no transfer).
Display
Settings
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8 The shaded
selection is the
default.
NO YS
Programming Procedures
1 Go off-line.
2 Press LK1 + LK6 +
J + J + H to access the Memory Block.
3 Press the corresponding CO/PBX line key to change the data option.
4 Press
G to write the data. The next Memory Block is displayed.
5 Program the next Memory Block or press
E to go back on-line.
System Mode
1
Submode
6
Data No.
08
PC Programming
¦ + BTD
0 8 : D S S S E L Y S
T I M E D I S P L A Y
Setting
Data
Title
Data
No.