NEC Electra Elite IPK - Access Code (2-Digit) Assignment

2 - 58 Memory Blocks
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
1-1-47 Access Code (2-Digit) Assignment
General Description
Use this Memory Block to assign a 2-digit number as an Access Code.
Display
Programming Procedures
1 Go off-line.
2 Press LK1 + LK1 +
DG to access the Memory Block.
3 Enter the options using the dial pad.
 Use the following to enter data:
J to move the cursor left
L to move the cursor right
K ~ I to enter numeric data
4 Enter the Function Number for the Dial Number. Refer to the table in Memory Block 1-1-46 [Access Code (1-Digit) Assignment].
5 Press
G to display next dial number in succession.
6 After programming last Dial No., press
G to display the next Memory Block.
7 Program the next Memory Block or press
E to go back on-line.
Related Programming
M.B. Number Memory Block Name
1-1-46
Access Code (1-Digit) Assignment
1-1-48
Access Code (3-Digit) Assignment
System Mode
1
Submode
1
Data No.
47
PC Programming
¦ +BA
4 7 : 2 D G ( 0 0 ) = 0 0 0
T I M E D I S P L A Y
Function
No.
Data
No.
Dial
No.
0~9
* #
Title