Programming Manual 1
___________________________________________________________________________________
___________________________________________________________________________________
PREFACE
SECTION 1ABOUT THIS MANUAL
The Programming Manual provides the technician with all of the necessary
information for programming the Electra Elite IPK system.
Programming can be accomplished using a PC or a Multiline Terminal.
SECTION 2MANUAL ORGANIZATION
This manual provides instructions for programming the Electra Elite IPK system.
Chapter 1 – Multiline Terminal Programming
This chapter includes the basic information for programming the system.
Chapter 2 – Memory Blocks
This chapter includes all of the Memory Blocks used to program the system. Detailed
programming instructions are provided for each Memory Block.
Chapter 3 – Advanced Applications
This chapter includes information for code restrictions, Automatic Route Selection
(ARS) and ISDN-PRI Call-by-Call.
Appendices
The appendices include the function time chart, character codes and the display
abbreviations.
To Next Page
Loading...
