NEC Electra Elite IPK - New AA-Info Yes;No Selection

Electra Elite IPK Document Revision 4
Programming Manual 2 - 257
___________________________________________________________________________________
___________________________________________________________________________________
1-8-49 New AA-Info Yes/No Selection
General Description
Use this Memory Block to specify whether or not New AA-Info is allowed. New
Application-to-Application (AA) Info is used with internal Voice Mail Systems
[i.e.,CMS( )-U( ), FMS( )-U( ), or VMS( )-U( ) ETUs]. For external digital Voice Mail
Systems and VP/CTI Systems, this Memory Block must be set to NO. Refer to Table
2-1 (Voice Mail AA-Info Settings).
R2000 or higher is required.
Display
Settings
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8 The shaded
selection is the
default.
NO YS
Programming Procedures
1 Go off-line.
2 Press LK1 + LK8 +
DI to access the Memory Block.
3 Press the corresponding CO/PBX line key to change the setting option.
4 Press
G to write the selected data and display next Memory Block or Memory Block 1-8-00.
5 Press
E to go back on-line.
System Mode
1
Submode
8
Data No.
49
PC Programming
¦ +AV
4 9 : N E W A A I N F O Y S
T I M E D I S P L A Y
Data
No.
Setting
Data
Title