Electra Elite IPK Document Revision 4
Programming Manual 2 - 239
___________________________________________________________________________________
___________________________________________________________________________________
1-8-30 SCD Group Agent Assignment
General Description
Use this Memory Block to assign stations to one of four simplified call distribution
groups. A total of 32 stations can be assigned.
Display
Programming Procedures
1 Go off-line.
2 Press LK1 + LK8 +
CK
to access the Memory Block.
3 Use dial pad to enter Grp (1~4) and the Setting Data (station number) for each agent.
Use the following to enter data:
K
~
I
to enter digits
J
to move cursor left
L
to move cursor right
Setting Data = Maximum of 4 digits
Default Values
Not Assigned
4 Press G to write the data and select the next Agent No.
5 Repeat Steps 3 and 4 for each remaining Agent No. The next Memory Block is displayed.
6 Program next Memory Block or press
E to go back on-line.
Related Programming
M.B. Number Memory Block Name
1-8-29
SCD (Simplified Call Distribution) Pilot Number Assignment
System Mode
1
Submode
8
Data No.
30
PC Programming
¦
+AA
3 0 : S G 0 1 1 =
T I M E D I S P L A Y
Data
No. Title
Setting
Data
Agent
1~32
Group
1~4
To Next Page
Loading...
