NEC Electra Elite IPK - DIT Weekend Mode Selection

Electra Elite IPK Document Revision 4
Programming Manual 2 - 485
___________________________________________________________________________________
___________________________________________________________________________________
3-63 DIT Weekend Mode Selection
General Description
Use this Memory Block to enable weekend (Holiday) Mode check on Tenant Groups
for incoming DIT calls.
Display
Settings
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8 The shaded
selection is the
default.
YS NO
Programming Procedures
1 Go off-line.
2 Press LK3 +
G + FC to access the Memory Block.
3 Press LK2 to disable weekend Mode check on Tenant Groups for incoming DIT calls on CO/PBX No.
 Use the following to enter data:
J to move the cursor left
L to move the cursor right
K ~ I to enter numeric data or CO/PBX No.
– OR –
D to go to the next assigned CO/PBX No.
4 Press
G to write the selected data and display the next Memory Block.
5 Program the next Memory Block or press
E to go back on-line.
CO/PBX Line Mod
e
3
Submode
—
Data No.
63
PC Programming
¦ +BCT
0 1 / 6 3 : H O L D I T Y S
T I M E D I S P L A Y
CO/PBX
No.
(01~64)
Data
No.
Setting
Data
Title