NEC Electra Elite IPK - CIC Number Assignment

Electra Elite IPK Document Revision 4
Programming Manual 2 - 493
___________________________________________________________________________________
___________________________________________________________________________________
3-70 CIC Number Assignment
General Description
Use this Memory Block to assign the Circuit Identification Code for each voice channel
used for K-CCIS.
Display
Programming Procedures
1 Go off-line.
2 Press LK3 +
G + GK to access the Memory Block.
 Use the following to enter data:
J to move the cursor left
L to move the cursor right
K ~ I to enter numeric data or CO/PBX No.
– OR –
D to go to the next assigned CO/PBX No.
Default Values
000 (Not Specified)
CIC Number range: 001~127
3 Press G to write the selected data and display next Memory Block or Memory Block 3-00 CO/PBX 02. After the last CO/
PBX is programmed, CO/PBX 01 is displayed again.
CO/PBX Line Mod
e
3
Submode
—
Data No.
70
PC Programming
¦ +AW
0 1 / 7 0 : C I C N O 0 0 0
T I M E D I S P L A Y
CO No.
(01~64)
Data
No.
Setting
Data
Title