NEC Electra Elite IPK - Call by Call Service Parameter Assignment

2 - 272 Memory Blocks
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
 Notes 
1-10-07
Call by Call Service Parameter Assignment
1-10-08
Call by Call Max Digit Assignment
1-10-09
Call by Call Simulated Facility Group Assignment
1-10-20
Call by Call Outgoing SFG Assignment
1-10-21
Call by Call Outgoing/ Incoming SFG Assignment
1-10-22
Call by Call Incoming Type Selection
1-13-03
Call by Call Service Selection
4-12
Line Key Selection for Telephone Mode
1. Call by Call Type of Network ID Assignment (Memory Block 1-10-00) and ID Plan Assignment (Memory Block
1-10-01) are sent to the network only when Network ID Assignment is made using Memory Block 1-10-04 (Call
by Call Network ID Assignment).
2. A three- or four-digit code is used to specify the setting data.
Related Programming
M.B. Number Memory Block Name