NEC Electra Elite IPK - Automated Attendant Message Repeat Selection

2 - 170 Memory Blocks
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
1-4-16 Automated Attendant Message Repeat
Selection
General Description
Use this Memory Block to specify the number of times a message from the Automated
Attendant Is repeated to the calling party.
Display
Settings
Related Programming
Refer to individual features in the Electra Elite IPK Features and Specifications Manual.
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8
The shaded
selection is the
default.
12 3 45678
Programming Procedures
1 Go off-line.
2 Press LK1 + LK4 +
JJAF to access the Memory Block.
3 Press the corresponding CO/PBX line key to change the number of times a message is
repeated.
Default Values
All Messages One Time
4 Press G to write the data and advance to next AA MSG.
5 Repeat Steps 3 and 4 for each AA MSG. The next Memory Block is displayed.
6 Program the next Memory Block or press
E to go back on-line.
System Mode
1
Submode
4
Data No.
16
PC Programming
¦ +AU
1 6 : A A M S G 1 1
T I M E D I S P L A Y
Data
No.
AA MSG.
(1~8)
Title
Setting
Data