NEC Electra Elite IPK - ISDN Line SPID Assignment

2 - 478 Memory Blocks
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
___________________________________________________________________________________
3-50 ISDN Line SPID Assignment
General Description
Use this Memory Block to assign the Integrated Services Digital Network Service
Profile Identifier (ISDN SPID) number.
Display
Programming Procedures
1 Go off-line.
2 Press LK3 +
G + EK to access the Memory Block.
3 Enter data for CO/PBX No. using the dial pad to assign ISDN SPID to a station.
 Use the following to enter data:
J to moves the cursor left
L to moves the cursor right
K ~ I to enter numeric data or CO/PBX No.
– OR –
D to go to the next assigned CO/PBX Line No.
4 Press
G to write the data and display the next Memory Block.
5 Program the next Memory Block or press
E to go back on-line.
CO/PBX Line Mod
e
3
Submode
—
Data No.
50
PC Programming
¦ +AN
0 1 / 5 0 :
T I M E D I S P L A Y
CO/PBX
No.
(01~64)
Data
No.
Setting Data
(20 digits maximum)