Electra Elite IPK Document Revision 4
Programming Manual 3 - 15
___________________________________________________________________________________
___________________________________________________________________________________
SECTION 2 AUTOMATIC ROUTE SELECTION
2.1 General
Route Selection is automatically directed by user-specified conditions.
Four Least Cost Routing (LCR) tables are provided for user-specified data that
can be used to select a single route.
User can delete digits from or add digits to a user specified dialing number to
use ARS to originate the call with LCR.
2.2 Memory Blocks
The following related Memory Blocks are used when assigning ARS.
Memory
Title Block
Access Code (1-Digit) Assignment..................................... 1-1-46
Class of Service (Station) Feature Selection 2....................1-8-08
ARS Allow/Deny Selection................................................1-14-00
ARS Dialing Assignment................................................... 1-14-01
ARS Dial Allow/Deny Selection.........................................1-14-02
ARS Route Table Number Assignment............................. 1-14-03
ARS Trunk Group to Route Number Assignment..............1-14-04
ARS Digit Delete Assignment........................................... 1-14-05
ARS Digit Add Assignment............................................... 1-14-06
ARS Max Digit Assignment ...............................................1-14-07
Trunk-to-Trunk Group Assignment......................................... 3-03
Trunk Type Selection..............................................................3-91
LCR Class Selection.............................................................. 4-40
To Next Page
Loading...
