NEC Electra Elite IPK - System Speed Dial Override by Class Selection

2 - 82 Memory Blocks
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
1-1-62 System Speed Dial Override by Class
Selection
General Description
Use this Memory Block to specify per Class whether or not Class Selection can
override System Speed Dial.
Display
Settings
 Notes 
LK 1 LK 2LK 3LK 4LK 5LK 6LK 7LK 8
The shaded
selection is the
default.
NO YS
(Override)
Programming Procedures
1 Go off-line.
2 Press LK1 + LK1 +
FB to access the Memory Block.
3 Press the corresponding CO/PBX line key to change the data option for Class 01.
4 Press
G to write the data and advance to the next class. Repeat Steps 3 and 4 for each class.
5 After data for the last class is entered, the next Memory Block is displayed.
6 Program the next Memory Block or press
E to go back on-line.
Related Programming
M.B. Number Memory Block Name
1-1-18
System Speed Dial Restriction by Tenant
At system default, all stations are set to Class 00 to allow override for System Speed Dial.
System Mode
1
Submode
1
Data No.
62
PC Programming
¦ +AC
Data
No
6 2 : S P D O V R ( 0 1 ) = Y S
T I M E D I S P L A Y
Class
No.
01~14
Title
Setting
Data