NEC Electra Elite IPK - Station to Class of Service Feature Assignment

2 - 526 Memory Blocks
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
___________________________________________________________________________________
4-17 Station to Class of Service Feature
Assignment
General Description
Use this Memory Block to specify a class for each Table (1 or 2) to enable/disable
features per station.
Display
Programming Procedures
1 Go off-line.
2 Press LK4 +
AG to access the Memory Block.
3 Use the dial pad to enter Service Class (00 ~ 15) for Table 1/Table 2.
 Use the following to enter data:
J to move the cursor left
L to move the cursor right
K ~ I to enter numeric data or Tel Port No.
– OR –
D to go to next assigned Tel Port No.
B + A to enter A for Port Numbers 100~109
B + B to enter B for Port Numbers 110~119
B + C to enter C for Port Number 120
4 Press
G to write the data and display Table 2 data.
5 Enter Table 2 Service Class, and press
G to write data and display the next Memory Block.
6 Program the next Memory Block or press
E to go back on-line.
Related Programming
M.B. Number Memory Block Name
1-8-07
Class of Service (Attendant) Feature Selection 1
1-8-08
Class of Service (Station) Feature Selection 2
Telephone Mode
4
Submode
—
Data No.
17
PC Programming
¦ +BTT
0 1 / 1 7 : C L S ( 1 ) = 0 0
T I M E D I S P L A Y
Data
No.
Title
Tel
Port
No.
(01~C0)
Table
No.
1/2
Setting
Service
Class
Default Values
Telephone
Number
Table
Number
Service
Class
01
1 ATTN 00
2 STA 00
02
1 ATTN 00
2 STA 00
03 ~ C0
1 ATTN 15
2 STA 00