NEC Electra Elite IPK - Station to Call Appearance Block Assignment

Electra Elite IPK Document Revision 4
Programming Manual 2 - 557
___________________________________________________________________________________
___________________________________________________________________________________
4-43 Station to Call Appearance Block
Assignment
General Description
Use this Memory Block to assign a Multiline Terminal to a Call Appearance Block.
Display
Related Programming
Refer to individual features in the Electra Elite IPK Features and Specifications Manual.
 Notes 
Programming Procedures
1 Go off-line.
2 Press LK4 +
DC to access the Memory Block.
3 Use the dial pad to enter Call Appearance Block assignment for Tel Port No.
 Use the following to enter data:
J to move the cursor left
L to move the cursor right
K ~ I to enter numeric data or Tel Port No.
– OR –
D to go to next assigned Tel Port No.
B + A to enter A for Port Numbers 100~109
B + B to enter B for Port Numbers 110~119
B + C to enter C for Port Number 120
Default Values
All stations are assigned to
Call Appearance Block 00.
4 Press G to write the data and display the next Memory Block.
5 Program the next Memory Block or press
E to go back on-line.
Telephone ports A0~C0 are ports 100~120.
Telephone Mode
4
Submode
—
Data No.
43
PC Programming
¦ +BTT
Data
No.
0 1 / 4 3 : C A P N O 0 0
T I M E D I S P L A Y
Title
Tel
Port
No.
(01
~ C0)
Setting
Data
(00~47)