NEC Electra Elite IPK - Page 139

2 - 62 Memory Blocks
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
 Notes 
1. Select options from the list of function numbers in Memory Block 1-1-46 [Access Code (1-Digit) Assignment],
and assign a 3-digit Access Code.
H When a function is assigned a 1-digit Access Code or 2-digit Access Code, 3-digit Access Codes (with the
same first digit) become invalid (i.e., if a function is assigned to Access Code 5, Access Codes 50~59, 5
, ,
and 5
# cannot be used).
2. A station number is not assigned in this Memory Block.
3. All items except function number 001 (Station Number) in 1-digit assignment are valid in this block (R2000 or
lower only).
4. Four groups of Access Code Tables can be used. 0~9,
, , and # are the third digit Access Codes that are
assigned in the third digit tables.
5. Before using this function, assign function numbers 301~304 (Table No. for third digit) in Memory Block 1-1-47
[Access Code (2-Digit) Assignment].
6. To program Access Code 811 for Trunk Group 02:
H Use Memory Block 1-1-47 [Access Code (2-Digit) Assignment] to assign function 301 to 81.
H Set Third Digit Table No. 01 dial number 1 to function 102.
7. By assigning Memory Blocks 1-2-03, 1-2-34, 1-1-47, and 1-1-48 as shown below, Stations can be assigned by
the 10s group for 4-digit station numbers, 100s group for 5-digit station numbers, 1000s group for 6-digit station
numbers, or 10000s group for 7-digit station numbers (System Software R2500).
4-Digit Station Numbers
MB 1-2-03 (2~7-Digit Station Number Selection) 4DGT
MB 1-2-34 (Expanded Station Number Assignment) Blank
MB 1-1-47 [Access Code (2-Digit ) Assignment] (AC20) 301 (Digit Table 01)
MB 1-1-48 [Access Code (3-Digit ) Assignment] (Table 01, Dial 0) 001 (Station Number)
Station Numbers are 2000~2009 (200X)
5-Digit Station Numbers
MB 1-2-03 (2~7-Digit Station Number Selection) 5DGT
MB 1-2-34 (Expanded Station Number Assignment) 2
MB 1-1-47 [Access Code (2-Digit ) Assignment] (AC20) 301 (Digit Table 01)
MB 1-1-48 [Access Code (3-Digit ) Assignment] (Table 01, Dial 0) 001 (Station Number)
Station Numbers are 20000~20009 (200XX)
6-Digit Station Numbers
MB 1-2-03 (2~7-Digit Station Number Selection) 6DGT
MB 1-2-34 (Expanded Station Number Assignment) 20
MB 1-1-47 [Access Code (2-Digit ) Assignment] (AC20 301 (Digit Table 01)
MB 1-1-48 [Access Code (3-Digit ) Assignment] (Table 01, Dial 0) 001 (Station Number)
Station Numbers are 200000~200999 (200XXX).