2 - 156 Memory Blocks
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
Notes
1. To speak to station user A, the outside user D dials the telephone number for TRUNK 1, confirms the Automated
Attendant message, and dials extension 100.
2. In the example at station A:
The ICM LED blinks and a ring tone that is different from the normal ringing tone is heard.
The call can be answered by lifting the handset.
Station users B and C cannot press the line key on the Multiline Terminals to answer the call.
3. In the example, if station user A does not answer in the specified time:
The ringing tone changes to the normal tone and station C starts ringing.
Any station (A, B, or C) user can press the flashing line key to answer the call.
4. Select
∞ (No Limit) to disable this feature.
1. Telephone ports 1 and 2 are in Station to Timer Class of Service, Class 1 by default. All other ports are in
Station to Timer Class of Service, Class 2 by default
(R3000 or higher).
2. When a system is upgraded from R2500 or lower to
R3000 or higher, the Automated Attendant Transfer
Delayed Ringing Time Selection is reset to the default value during the upgrade process
.
Example:
( D)
(A) 100
(B) 101
(C) 102
(C) 102
(B) 101
(A) 100
In this example, Public Switching Telephone Network (PSTN) and the system are
connected by Trunk 1. Stations A (extension 100) and C (extension 102) are ring
assigned to Trunk 1. Trunk 1 is assigned to Automated Attendant trunk.
PSTN
Elite IPK
Trunk 1
Time Elapsed
To Next Page
Loading...
