NEC Electra Elite IPK - Page 244

Electra Elite IPK Document Revision 4
Programming Manual 2 - 167
___________________________________________________________________________________
___________________________________________________________________________________
 Notes 
1. Function 011 (Bypass Automated Attendant) uses Memory Blocks 4-01 [CO/PBX Ring Assignment (Day Mode)]
and 4-02 [CO/PBX Ring Assignment (Night Mode)] to ring according to those assignments.
2. Functions 015~016 (Ring Internal Paging Zone A/B/C) require assigning the following to ring the desired station:
Memory Block 4-01 [CO/PBX Ring Assignment (Day Mode)]
Memory Block 4-02 [CO/PBX Ring Assignment (Night Mode)]
Memory Block 4-93 (Internal Zone Paging Selection).
3. When a caller receives a busy signal after being transferred by the Automated Attendant, the following Fixed
Access Codes apply:
A Step Call
J Receive a second dial tone
L CO rings based on Day/Night Ring Assignment.