NEC Electra Elite IPK - Page 263

2 - 186 Memory Blocks
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
3 Press the corresponding CO/PBX line key and dial pad keys to change the data
option:
Functions can be assigned to keys 01~60 on Attendant Add-On Consoles 1~4.
Functions to be programmed
:
H Station No. 01~120
H Internal Paging Zone A
H Internal Paging Zone B
H Internal Paging Zone C
H Internal Paging Zone ALL
H External Paging Zone A
H External Paging Zone B
H External Paging Zone C
H External Zone Paging ALL
H Message Waiting
H Night Mode Switching
H Transfer
H Attendant Station Outgoing Lockout
H CO (Trunk 01~64)
H Feature Access Key with Live Record
H Digital Voice Mail Mailbox Number
H DPH 1 & 2
H General Purpose Relay 0 and 1
DSS Key Number
4 Press G to write the data.
5 Repeat Steps 3 and 4 for all buttons for each DSS. The next Memory Block is displayed.
6 Program the next Memory Block or press
E to go back on-line.
Programming Procedures (Continued)
1 2 3 4 5 6
7 8 9 10 11 12
13 14 15 16 17 18
19 20 21 22 23 24
25 26 27 28 29 30
31 32 33 34 35 36
37 38 39 40 41 42
43 44 45 46 47 48
49 50 51 52 53 54
55 56 57 58 59 60
Default Values
 Use the following to enter data:
J to move the cursor left
L to move the cursor right
K ~ I to enter numeric data
G t o write se lecte d data
C to go to the next page
A to go to the previous
page
DSS
No.
Key No. Data Setting
1~4
01 TEL No. 01
02 TEL No. 02
~ ~
48 TEL. No. 48
49 Night Mode Switching
50
Internal Paging Zone A
(INT A)
51
Internal Paging Zone B
(INT B)
52
Internal Paging Zone C
(INT C)
53
All Internal Paging Zone
(INT ALL)
54 Vacant
55 Message Waiting (MSG)
56
External Paging Zone A
(EXT A)
57
External Paging Zone B
(EXT B)
58
External Paging Zone C
(EXT C)
59
External Paging Zone All
(EXT ALL)
60 Transfer (TRF)