NEC Electra Elite IPK - Page 353

2 - 276 Memory Blocks
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
 Notes 
Related Programming
M.B. Number Memory Block Name
3-03
Trunk-to-Trunk Group Assignment
1-1-30
Route Advance Block Assignment
1-1-46, 47, 48
Access Code (1-, 2-, or 3-Digit) Assignment
1-10-00
Call by Call Type of Network ID Assignment
1-10-01
Call by Call ID Plan Assignment
1-10-02
Call by Call Type of Number Assignment
1-10-03
Call by Call Numbering Plan ID Assignment
1-10-04
Call by Call Network ID Assignment
1-10-05
Call by Call Facility Coding Value Assignment (Service)
1-10-07
Call by Call Service Parameter Assignment
1-10-08
Call by Call Max Digit Assignment
1-10-09
Call by Call Simulated Facility Group Assignment
1-10-20
Call by Call Outgoing SFG Assignment
1-10-21
Call by Call Outgoing/ Incoming SFG Assignment
1-10-22
Call by Call Incoming Type Selection
1-13-03
Call by Call Service Selection
4-12
Line Key Selection for Telephone Mode
SW1 is a 4-position DIP switch on the PRT(1)-U( ) ETU that is used to select the desired application.