Electra Elite IPK Document Revision 4
Programming Manual 2 - 285
___________________________________________________________________________________
___________________________________________________________________________________
1-10-21 Call by Call Outgoing/Incoming SFG
Assignment
General Description
Use this Memory Block to specify the outgoing/incoming call service assignment for
the Simulated Facility Group (SFG).
Display
Programming Procedures
1 Go off-line.
2 Press LK1 + LK10 +
JJBA
to access the Memory Block.
3 Enter three or four digit data using the dial pad.
Use the following to enter data:
J
and
L
to move the cursor
K
~
I
to enter data
D to select next SFG No.
Setting Data = 01~64
= 99 (Not Specified)
Default Values
All SFGs 99
4 Press G to write the data. The next Memory Block is displayed.
5 Program the next Memory Block or press
E to go back on-line.
Related Programming
M.B. Number Memory Block Name
3-03
Trunk-to-Trunk Group Assignment
1-1-30
Route Advance Block Assignment
1-1-46, 47, 48
Access Code (1-, 2-, or 3-Digit) Assignment
1-10-00
Call by Call Type of Network ID Assignment
1-10-01
Call by Call ID Plan Assignment
1-10-02
Call by Call Type of Number Assignment
1-10-03
Call by Call Numbering Plan ID Assignment
1-10-04
Call by Call Network ID Assignment
System Mode
1
Submode
10
Data No.
21
PC Programming
¦
+AY
0 1 / 2 1 : O G I C = 9 9
T I M E D I S P L A Y
Data
No.
Setting
Data
SFG
01~16
Title
To Next Page
Loading...
